MAN0887-05-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
3/2/2010 Page 1 of 8 #1037
1 Specifications
Specifications
Digital DC Inputs Digital DC Outputs
Inputs per Module 12 including 4 configurable HSC inputs Outputs per Module 12 including 2 configurable PWM outputs
Commons per Module 1 Commons per Module 1
Input Voltage Range 12 VDC / 24 VDC Output Type Sourcing / 10 K Pull-Down
Absolute Max. Voltage 35 VDC Max. Absolute Max. Voltage 28 VDC Max.
Input Impedance
10 kΩ
Output Protection Short Circuit
Input Current Positive Logic Negative Logic Max. Output Current per point 0.5 A
Upper Threshold 0.8 mA -1.6 mA Max. Total Current 4 A Continuous
Lower Threshold 0.3 mA -2.1 mA Max. Output Supply Voltage 30 VDC
Max Upper Threshold 8 VDC Minimum Output Supply Voltage 10 VDC
Min Lower Threshold 3 VDC Max. Voltage Drop at Rated Current 0.25 VDC
OFF to ON Response 1 ms Max. Inrush Current 650 mA per channel
ON to OFF Response 1 ms Min. Load None
OFF to ON Response 1 ms
ON to OFF Response 1 ms
HSC Max. Switching Rate
10 kHz Totalizer/Pulse, Edges
5 kHz Frequency/Pulse, Width
2.5 kHz Quadrature
Output Characteristics Current Sourcing (Positive Logic)
Analog Inputs, High Resolution
Number of Channels 2 Thermocouple Temperature Range
B / R / S
2912°F to 32.0°F (1600°C to 0°C)
E
1652°F to -328°F (900°C to -200°C)
Input Ranges
(Selectable)
0 - 10 VDC
0 – 20 mA
4 – 20 mA
100mV
PT100 RTD,
and J, K, N, T, E, R, S, B Thermocouples
T
752.0°F to -400.0°F (400°C to -240°C)
J
1382.0°F to -346.0°F (750°C to -210°C)
K / N
2498.0°F to -400°F (1370°C to -240°C)
Safe input voltage range
10 VDC: -0.5 V to +15 V
20 mA: -0.5 V to +6 V
RTD / T/C: ±24 VDC
Thermocouple Common Mode Range ±10V
Nominal Resolution
10V, 20mA, 100mV: 14 Bits
RTD, Thermocouple: 16 Bits
Converter Type Delta Sigma
Max. Error at 25°C
(*excluding zero)
*4-20 mA ±0.10%*
*0-20 mA ±0.10%*
*0-10 VDC ±0.10%*
RTD (PT100) ±1.0 °C
0-100 mV ±0.05%
Input Impedance
(Clamped @ -0.5 VDC to 12
VDC)
Current Mode:
100 Ω, 35mA Max. Continuous
Voltage Mode:
500 kΩ, 35mA Max. Continuous
(After Warm Up Time of One Hour)
±0.2% (±0.3% below -100°C)
%AI full scale
10 V, 20 mA, 100 mV: 32,000 counts full scale.
RTD / T/C: 20 counts / °C
Conversion Speed, Both Channels
Converted
10V, 20mA, 100mV: 30 Times/Second
RTD, Thermocouple: 7.5 Times/Second
Max. Over-Current 35 mA Conversion Time per Channel
10V, 20mA, 100mV: 16.7mS
RTD, Thermocouple: 66.7mS
Open Thermocouple Detect
Current
50 nA RTD Excitation Current
250 µA
Analog Outputs General Specifications
Number of Channels 2
Required Power
(Steady State)
500 mA @ 24 VDC
Output Ranges
0-10 VDC,
0-20 mA
Required Power (Inrush)
30 A for 1 ms @ 24 VDC – DC Switched
2.5 A for 4 ms @ 24 VDC - AC Switched
Nominal Resolution 12 Bits Primary Power Range 10 - 30 VDC
Update rate Once per PLC scan Operating Temperature
-10° to 60° Celsius
Minimum 10 V load
1 kΩ
Storage Temperature 14 to 140°F (-10 to 60°C)
Maximum 20 mA load
500 Ω
Relative Humidity 5 to 95% Non-condensing
Analog Outputs;
Output Points Required
2 Filtering
15Hz hash (noise) filter
1-128 scan digital running average filter
Terminal Type Screw Type,5 mm Removable
Maximum Error at 25°C (excluding
zero)
0.1%
Weight 26.5 oz. (0.751kg)
CE
Additional error for temperatures
other than 25°C
0.01% / °C
UL
USA: http://www.heapg.com/Pages/TechSupport/ProductCert.html
Europe: http://www.horner-apg.com/en/support/ certification.aspx
Clock Accuracy
+/- 35 ppm maximum at 25° C (+/- 1.53 Minutes per Month)
Display Properties
Display Life
Minimum 40000 hours (50%
brightness, 25 deg C)
Display Type 5.7” QVGA TFT
User Keys
5 user-defined Function keys and
a System Key
Display Size 5.7”
Screens supported 1023 Display Screen Dimension 320 x 240
Colors
32768/ 16 shade Grey scale
(XL6M models only)
Display Memory 2.75 MB
XL6/XL6M/XL6e OCS Models
HE-XL105 / HE-XL1M5 / HEXT350C115 / HEXT280C115
HE-XL1E5 / HEXT351C115
12 Digital DC Inputs / 12 Digital DC Outputs
2 Analog Inputs (High Resolution) / 2 Analog Outputs
Komentarze do niniejszej Instrukcji